ADAT sync/NT MIDI

[TechSupt]

Hi. The ADAT Bridge I/O is the only ADAT interface offered on the NT system. The USD is supported on the system via the Digi serial port on the bus card. You can use a JL Cooper data sync in conjunction with the USD for near sample accurate sync between the ADAT and PT sessions.

The MIDI Man 4X4 is the Midi interface that Digi highly recommends for the NT system.

Tom S.

[wolftone]

I'm upgrading from S8 PC to PT24 NT and would like to know what sort of ADAT sync solutions anyone might be using for PT24 NT with the ADAT bridge. USD, MOTU Digital Timepiece ?

Also, what MIDI interfaces work well with PT24 NT?

Reguards,

Steve Blake
Wolftone Productions

[wolftone]

Tom,

Thanks for your reply. As I am still waiting to receive my PT24/NT system, could you clarify the requirements for syncing ADAT to PT24/NT.

As I understand it, an ADAT sync device (with SuperClock and 9 pin ADAT sync)connects to the ADAT bridge Superclock and to the ADAT via 9pin sync cables. Light pipes are connected from the ADAT bridge to the ADAT and MMC is provided via MIDI from PT24 to the ADAT sync device.

Just trying to grasp the difference between the old ADAT xface and the ADAT bridge configuration.