Fader Pack Sleep Mode

[soundmotiv]

If I activate Sleep Mode in my ProControl,
(Utility Menue)only the Main unit sleeps
after the programmed time. The Fader Packs don't switch off. How can I activate them ?

MJR

------------------
MJR

[maxtn]

I know this is old but I have the same problem. I did a search and found nothing. Using a PPC and 7.4. Thanks in advance for help.

Max:-)

[nymo]

Hi there,

Of course I would like to know this as well.

Cheers
N
Y
M
O

[maxtn]

All,

To enter the utility mode for a fader pack, press on each fader pack Shift/ADD +OPT(ALT)ALL+F4 ...You can adjust like the Main unit.


M

[jerico]

Hi m

my procontrol has begun to freak out - a bit like in the matrix ( the movie) the text shifts and wavers then the whole thing has a fit - like vagas on acid... I have added a edit pack and an extra fader pack - the problem seems to have begun then - if i disconnect everything and just run the pro control it still freaks - about every 5 minutes crashing the whole system. Any thoughts?
Many thanks
j

[maxtn]

Hi J

Sorry you are having such big problems... I have never seen or had such.

As I remember you do not use DIGI I/O. That could be your problem not sure, but if you can get access to just DIGI you might be able isolate issues. That is all I know other than Tiger 7.3 and 7.4 is stable.

M

[jerico]

Many thanks M
all the best
J